Aluminum Foil Tape AF4505

(High quality HVAC/R thermal insulation tape)

Descriptions of Aluminum Foil Tape AF4505:
This commonly used industrial adhesive tape is composed of 145 micron (1.8 mil) aluminium foil backing with high tensile strength, a synthetic rubber-resin adhesive with high adhesion, and silicone release paper easy to release.

Features and Applications of Aluminum Foil Tape AF4505:
1. For its good heat and light reflection capability as well as strong adhesion, BondTape aluminium foil tapes are extensively used in HVACR industries for duct seaming and jointing.
2. Low moisture vapor transmission rate.
3. Service temperature range from -20° to +80°C (-4° to +176°F).

Typical Physical Properties of Aluminum Foil Tape AF4505:

Properties	Metric		Testing Method
Backing Thickness	45 Micron	1.8 Mil	PSTC-133 / ASTM D 3652
Total Thickness	85 Micron	3.4 Mil	PSTC-133 / ASTM D 3652
Adhesion to Steel	25 N/25mm	90 Oz./In.	PSTC-101 / ASTM D 3330
Tack Rolling Ball	20 cm	8.0 In.	PSTC-6 / ASTM D 3121
Tensile Strength	65 N/25mm	14.8 Lb/In	PSTC-131 / ASTM D 3759
Elongation	3.0 %	3.0 %	PSTC-131 / ASTM D 3759
Service Temperature	-20 ~ +80 °C	-4 ~ +176 °F	------------
Applying Temperature	+10 ~ 40 °C	+50 ~ +105 °F	------------

More Information about Aluminium Foil Tape AF4505:
1. Available Product Forms and Sizes:
Cut Roll: 48 / 50mm (2") / 60 / 63mm (2.5") / 72 / 75mm (3") / 96mm / 100mm (4")
Log Roll: 1200mm x 45 / 50m
Jumbo Roll: 1200mm x 1000m / 1200m / 1350m
2. Important Note:
(1). The data above are typical values only, and should not be used for specifications purpose.
For detailed product specifications, please contact us directly (Tel: +86-510-8616 02**).
(2) Tolerance: Weight and Thickness: ±10%; Width: ±3mm; Length: Cut Roll: ±0.3m, Jumbo Roll ±0.5%.
3. Storage and Shelf Life:
12 months when satisfying the following conditions: at temperature of 21°C (70°F), 50% relative humidity and keeping away from direct sunlight.

Warm Suggestion for Using of AF4505 Aluminium Foil Tapes:
1. BondTape industrial adhesive tapes have to be applied on clean and dry surfaces with suitable pressure.
2. Best application conditions: temperature: +10 ~ +40°C (+50 ~ +105 °F).
3. Suitability test is necessary if you are not sure whether BondTape tape is fit for your application purpose and application condition.