Foil-PE Mesh Tape FEM7205A

(High quality HVAC/R thermal insulation tape)

Introduction on Foil-PE Mesh Tape FEM7205A:
BondTape foil-PE mesh tape FEM7205A is composed of foil-PE mesh backing, high performance rubber-resin adhesive and easy-release silicon release paper.
This kind of thermal insulation tape is usually used for connecting and seaming HVAC ducts, pipe sections and fiberglass blankets, etc.

Features and of Foil-PE Mesh Tape FEM7205A:
1. Good reflection performance for heat and light.
2. High quality pressure-sensitive adhesive offers reliable and durable adhesion performance.
3. Low water vapor transmission rate.
4. Wide range of service temperature (-20+80C/-4~+176F).

Typical Physical Properties of Foil-PE Mesh Tape FEM7205A:

Properties	Metric		Testing Method
Backing Thickness	125 Micron	5.0 Mil	PSTC-133 / ASTM D 3652
Total Thickness	175 Micron	7.0 Mil	PSTC-133 / ASTM D 3652
Adhesion to Steel	25 N/25mm	90 Oz./In.	PSTC-101 / ASTM D 3330
Tack Rolling Ball	20 cm	6.0 In.	PSTC-6 / ASTM D 3121
Tensile Strength	115 N/25mm	26 Lb/In	PSTC-131 / ASTM D 3759
Elongation	%.	25.0	PSTC-131 / ASTM D 3759
Service Temperature	-20 ~ +80 °C	-4 ~ +176 °F	------------
Applying Temperature	+10 ~ 40 °C	+50 ~ +105 °F	------------

More Information about Foil-PE Mesh Tape FEM7205A:
1. Available BondTape Product Sizes and Forms:
Cut Roll: 48 / 50mm (2") / 60 / 63mm (2.5") / 72 / 75mm (3") / 96mm / 100mm (4")
Log Roll: 1200mm x 45 / 50m
Jumbo Roll: 1200mm x 750m / 850m
2. Important Note:
(1) The data above are typical values only, and should not be used for specifications purpose.
For detailed product specifications, please contact us directly (Tel: +86-510-8616 02**).
(2) Tolerance:
Weight and Thickness: ±10%; Width: ±3mm; Length: Cut Roll: ±0.3m, Jumbo Roll ±0.5%.
3. Storage and Shelf Life:
12 months (preservation condition: temperature: 21°C, relative humidity: 50%, avoid of direct sunlight)

Usage Suggestion:
1. BondTape FEM7205A should be applied on clean and dry surfaces with suitable pressure on; and the optimum application temperature is +10 ~ +40°C/+50 ~ +105 °F.
2. Suitability test is necessary if you are not sure whether BondTape tapes are fit for your specific need and application condition.