Aluminum Foil Tape AF5025R

(FR Grade Class O Thermal Insulation Tapes)

Introductions on Aluminum Foil Tape AF5025R:
Aluminium foil tape AF5025R is composed of 50 micron/2.0 mil aluminum foil backing with high tensile strength, solvent acrylic adhesive which is flame-retardant and silicon release paper which is easy to release.

Features of Aluminum Foil Tape AF5025R:
1. Aluminium backing enable BondTape tapes have good heat and light reflection performance;
2. Durable sealing and bonding for HVAC ducts, etc. for the high quality adhesive;
3. Wide range of service temperature: -30° to +120°C/-22° to +248°F;
4. A good vapor barrier product for its low water vapor transmission rate.

Typical Applications:
Extensively used in HVACR industry to joint and seal the joints and seams of/between fiberglass blankets, fiberglass duct boards and ventilation ducts, etc.

Typical Physical Properties of Aluminum Foil Tape AF5025R:

Properties	Metric		Testing Method
Backing Thickness	50 Micron	2.0 Mil	PSTC-133 / ASTM D 3652
Total Thickness	90 Micron	3.6 Mil	PSTC-133 / ASTM D 3652
Adhesion to Steel	20 N/25mm	72 Oz./In.	PSTC-101 / ASTM D 3330
Tack Rolling Ball	15 cm	6.0 In.	PSTC-6 / ASTM D 3121
Tensile Strength	75 N/25mm	17.0 Lb/In	PSTC-131 / ASTM D 3759
Elongation	3.5 %	3.5 %	PSTC-131 / ASTM D 3759
Service Temperature	-30 ~ +120 °C	-22 ~ +248 °F	------------
Fire Rating	25 / 50 & Class O	25 / 50 & Class O	UL 723 & BS476 Pt. 6 & 7

More Information about BondTape Aluminium Foil Tapes:
1. Available tape forms and sizes:
Cut Roll: 48 / 50mm (2") / 60 / 63mm (2.5") / 72 / 75mm (3") / 96mm / 100mm (4")
Log Roll: 1200mm x 45 / 50m
Jumbo Roll: 1200mm x 1000m / 1200m
2. Important Note
(1) The data above are typical values only, and should not be used for specifications purpose.
For detailed product specifications, please contact us directly (Tel: +86-510-8616 02**).
(2) Tolerance:
Weight and Thickness: ±10%; Width: ±3mm; Length: Cut Roll: ±0.3m, Jumbo Roll ±0.5%.
3. Storage and Shelf Life:
12 months (when preservation condition satisfies the following requirements: temperature: 21°C/70°F; relative humidity: 50%; avoid direct sunlight.)

Usage Instruction:
1. Suitability test is necessary if you are not sure whether BondTape industrial adhesive tape is fit for your particular application purpose and application condition.
2. Suitable pressure is needed while applying our tapes onto material surfaces for our adoption of pressure-sensitive adhesive.
3. Best application conditions: Should be applied onto clean and dry surfaces at the optimum temperature of +10 ~ +40°C; or else, the adhesion effect will be reduced.