- Alum.Foil Tapes / HVAC/R Insulation Tapes
- Vapor Barrier
Laminated Insulation Facing - Heat Sealing Foil Kraft Facing FKE-7051
- FSKE-7151A
- FSKE-7152A
- FSKE-7161A
- FSKE-7151B
- FSKE-7152B
- FSKE-7161B
- FKSE-7511B
- FSE-1881B
- DS Reflective Aluminum Foil Insulation
- Cloth Duct Tape
- Double Sided Tapes
- Various General Adhesive Tapes
Home » Products » Vapor Barrier ( Laminated Insulation Facing ) » Heat Sealing Foil Scrim Kraft Facing
Heat Sealing Foil Kraft Facing FKE-7051
(Vapor Barrier, Laminated Insulation Tape)Introduction on Heat-Sealing Foil-Kraft Facing FKE-7051:
1. BondTape utility grade Heat-Sealing Foil-Kraft Facing contains 7 micron foil, 50gsm Kraft and heat-activated polyethylene on its back.
2. It is suitable for in-line lamination with insulation materials by heating.
3. BondTape foil kraft facing has the following features: no need applying extra adhesive; good corrosion resistance.
Heat Sealing Foil Kraft Facing Composition:
Facing Composition | Description | Value (English) | Value (Metric) |
Foil | Aluminum | 0.28 mil | 7 micron |
Adhesive | Glue | ------ | ------ |
Kraft | Natural | 30 lbs / 3000 ft2 | 50gsm |
Heat-Activated Coating | Polyethylene | 1 mil | 25 micron |
Physical Properties | Test Method | Value (English) | Value (Metric) |
Basis Weight | Scale | 19.4 lbs / 1000 ft2 | 95 gsm |
Permeance (WVTR) | ASTM E96, Procedure A | 0.02 perm | 1.15 ng/N.s |
Tensile Strength - MD | ASTM D828 | 13.9 lbs/In | 105 N/25mm |
Tensile Strength - XD | ASTM D828 | 12.5 lbs/In | 55 N/25mm |
Burst Strength | ASTM D774 | 36.3 psi | 25 N/cm2 |
Low Temperature Resistance | ASTM D1790 4 hrs @-40 °F (- 40 °C) | No Delamination | No Delamination |
High Temperature Resistance | ASTM D1790 4 hrs @ +240 °F (+116 °C) | No Delamination | No Delamination |
Dimensional Stability | ASTM D1204 @ 150F (65C) | Less than 0.5% | Less than 0.5% |
Emissivity | ASTM E408 | 0.03 | 0.03 |
Remarks:
1. The data above are typical values only, and should not be used for specifications purpose.
For detailed product specifications, please contact us directly (Tel: +86-510-8616 02**).
2. Tolerance: Weight and Thickness: ±10%; Width: ±3mm; Length: Log Roll: ±0.3m, Jumbo Roll ±0.5%.
3. BondTape vapor barrier products should be preserved at normal temperature and keep away from moisture and fire.
4. Suitability test is necessary if you are not sure whether BondTape laminated insulation facing is fit for your specific application.