Heat Sealing Foil Scrim Kraft Facing FSKE-7152A

(Vapor Barrier, Laminated Insulation Tape)

Introduction on Heat Sealing Foil Scrim Kraft Facing FSKE-7152A:
1. BondTape Heat Sealing Foil Scrim Kraft Facing contains 3-way scrim, 50gsm Kraft and thickened heat-activated polyethylene on its back.
2. The FSK facing is suitable for in-line lamination with insulation materials by heating.
3. BondTape foil scrim kraft facing has the following features: no need applying extra adhesive; good corrosion resistance.

Heat Sealing Foil Scrim Kraft Facing Composition:

Facing Composition	Description	Value (English)	Value (Metric)
Foil	Aluminum	0.28 mil	7 micron
Reinforcing - MD	Fiberglass	2 / inch	8 / 100mm
Reinforcing - XD	Fiberglass	3 / inch	12 / 100mm
Adhesive	Polyethylene	------	------
Kraft	Natural	30 lbs / 3000 ft2	50gsm
Heat-Activated Coating	Polyethylene	1.5 mil	37.5 micron

Typical Physical Properties of Heat Sealing Foil Scrim Kraft Facing:

Physical Properties	Test Method	Value (English)	Value (Metric)
Basis Weight	Scale	23.5 lbs / 1000 ft2	115 gsm
Permeance (WVTR)	ASTM E96, Procedure A	0.02 perm	1.15 ng/N.s
Tensile Strength - MD	ASTM D828	30.7 lbs/In	135 N/25mm
Tensile Strength - XD	ASTM D828	17 lbs/In	75 N/25mm
Burst Strength	ASTM D774	47.9 psi	33 N/cm2
Low Temperature Resistance	ASTM D1790 4 hrs @-40 °F (- 40 °C)	No Delamination	No Delamination
High Temperature Resistance	ASTM D1790 4 hrs @ +240 °F (+116 °C)	No Delamination	No Delamination
Dimensional Stability	ASTM D1204 @ 150F (65C)	Less than 0.5%	Less than 0.5%
Emissivity	ASTM E408	0.03	0.03

Available Roll Width: 1.0m, 1.2m, 1.25m, 1.30m, 1.35m

Remarks:
1. The data above are typical values only, and should not be used for specifications purpose.
For detailed product specifications, please contact us directly (Tel: +86-510-8616 02**).
2. Tolerance: Weight and Thickness: ±10%; Width: ±3mm; Length: Log Roll: ±0.3m, Jumbo Roll ±0.5%.
3. BondTape vapor barrier products should be preserved at normal temperature and keep away from moisture and fire.
4. Suitability test is necessary if you are not sure whether BondTape laminated insulation facing is fit for your specific application.